Aqua Lung SEA MK Betriebsanleitung PDF herunterladen (Seite 41)

page 35

ITEM REQ’D PART NO. AQUALUNG

PART NO.

DESCRIPTION

PRS6

1 1 PRS6-1 820040 O-RING

2 1 PRS6-3 106058 STEM (Cannot be purchased separately.)

3 1 PRS6-2 820039 O-RING

4 1 PRS6-4 108657 HANDWHEEL (Cannot be purchased separately.)

5 1 PRS6-5 054159 1/4”NPT FITTING (Cannot be purchased separately.)

6 1 347-1 103248 CGA 347 TO 1/4” FNPT BRASS

PRS6 OVERHAUL

To disassemble, hold 1/4” NPT ﬁ tting (5) using 11/16” socket. Using a 6mm Allen 1.

wrench, unscrew stem (2) with a counter-clockwise motion.

Remove O-rings from stem, using O-ring pick. Discard. 2.

The 820039 O-ring (3) on the PRS/MRS DIN connector must have a light coat of non-3.

toxic lubricant (Christo-Lube) applied prior to being installed on the assembly. NOTE:

Do not apply any lubricant to the 820040 O-ring (1).

Install lubricated O-ring (3) over the threads of the stem (2) taking care to not damage the 4.

O-ring.

Install O-ring (1) all the way back into the O-ring groove of stem (2).5.

Place the handwheel (4) over the 1/4” NPT ﬁ tting (5) with the threads pointed upward.6.

Thread stem (2) into 1/4” NPT ﬁ tting (5) using a 6mm Allen wrench. Use 11/16” socket 7.

to hold 1/4” NPT ﬁ tting.

Torque stem (2) to 1/4” NPT ﬁ tting (5) -- 40.0 +/- 5.0 inch pounds.8.

1 2 ... 36 37 38 39 40 41 42 43 44 45

Keine Kommentare

Aqua Lung SEA MK Betriebsanleitung Seite 41