Aqua Lung LEGEND Bedienungshandbuch PDF herunterladen (Seite 12)

IMPORTANT REMINDER:

Before attempting to remove the second stage from the hose, confirm the

regulator is not pressurized and the first stage is removed from the cylinder.

Do not leave the first stage connected to a cylinder valve if the second stage is

removed from its hose.

It’s recommended to use the hose clip (pn 216047). The clip will allow the end

of the hose to be attached onto

the hose itself or onto the D-ring

of the BC.

Attaching the hose onto itself:

Attaching the hose onto a BC D-

ring:

2.5.2 Disassembly

To disconnect the hose, pull the lock away from the nut

while at the same time loosening the nut. The double

action of the quick-connect fitting will prevent the hose

from accidentally disconnecting.

REMINDER: This operation must only be performed with

the regulator depressurized and in a clean environment.

If you attempt to loosen the hose while the regulator is

still under pressure, a large air leak will happen approxi-

mately 2 turns before the nut is completely unthreaded.

If this occurs, stop loosening the nut and close the cylin-

der valve. Wait until the leak stops before continuing.

Disconnect the first stage from the cylinder valve.

Final removal of the hose.

To avoid contamination, don’t leave the hose disconnec-

ted from the second stage.

B a c k t o t h e c o n t e n t s

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Keine Kommentare

Aqua Lung LEGEND Bedienungshandbuch Seite 12