Aqua Lung SEA MK Anleitung zur Fehlerbehebung PDF herunterladen (Seite 17)

WARNING: The SEA MK is designed to assist heli-

copter crew members and passengers in emergency

egress situations from submerged aircraft. It is very

critical to ensure that no leakage is present, and that

the unit has met all requirements in the Final Testing

Procedures outlined above. DO NOT issue to a crew

member or passenger any SEA MK which exhibits

any signs of leakage or unsatisfactory performance

until the problem has been thoroughly diagnosed

and repairs have been made as needed, including

the possible replacement of a damaged component

or subassembly.

3. As a nal test, leave the unit pressurized with the valve

completely open at a stable temperature for a period of at

least twelve hours, and check the pressure gauge to determine

whether any air loss occurs. If air loss occurs, repeat Immersion

THIS ENDS REASSEMBLY

Test (p. 16) for a longer period of time until leak is discovered.

Repair as required.

4. Upon completion of test, ensure no water remains in the cap.

Shake or blow out with clean air. Ensure unit is dry. Reinstall

ll port cap (21) and rubber protective cover (29).

This concludes the service procedures for

the SEA MK First and Second Stages.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Keine Kommentare

Aqua Lung SEA MK Anleitung zur Fehlerbehebung Seite 17