Aqua Lung SEA MK Anleitung zur Fehlerbehebung Seite 18

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 30
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 17
18
SEA MK Technical Maintenance Manual
Table 1: Troubleshooting Guide
First Stage/Valve Assembly
SYMPTOM POSSIBLE CAUSE TREATMENT
LP system will not remain depressurized
after valve is shut and second stage is
purged.
1. The valve seat (20) is worn or damaged. 1. Replace valve seat.
2. The valve seating surface is damaged. 2. Replace body (36).
High or Unstable MP
1. The valve seat (20) is worn or damaged. 1. Replace valve seat .
2. The valve seating surface is damaged. 2. Replace body (36).
3. The main spring (35) is defective. 3. Replace main spring.
4. The HP seat (34) is worn or damaged. 4. Replace HP seat.
5. The HP crown sealing surface is
damaged.
5. Replace o-ring.
Low MP
1. Main spring (35) is weakened or
damaged.
1. Replace spring (35).
External Air Leak
1. The piston head o-ring (31) or shaft o-ring
(33) is worn or damaged.
1. Replace o-ring(s).
2. The o-ring grooves on the piston (32)
are damaged.
2. Replace piston.
3. The piston head o-ring sealing surface in
the piston cap (30) is damaged.
3. Replace piston cap.
4. The piston shaft o-ring sealing surface in
the body is damaged.
4. Replace body.
5. Blow out plug not seated correctly.
5. Retorque or replace.
6. Check seating surface for nicks or
debris.
Table 2: Troubleshooting Guide
Second Stage
SYMPTOM POSSIBLE CAUSE TREATMENT
Leakage or freeow from the
second stage
1. High rst stage MP (should be 135±20
psi).
1. Refer to rst stage Troubleshooting
Guide above.
2. The LP seat (51) is worn or damaged. 2. Replace LP seat.
3. The lever (45) is set too high. 3. Readjust locknut.
4. The lever (45) is damaged.
4. Disassemble second stage
and replace lever.
5. The crown sealing surface on the inlet
tting (52) is worn or damaged.
5. Replace inlet tting.
6. The poppet (50) is worn or damaged. 6. Replace poppet and LP seat.
7. The poppet spring (49) is damaged. 7. Replace poppet spring.
Seitenansicht 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Kommentare zu diesen Handbüchern

Keine Kommentare